BRD-LD04 Impinj R2000 Built-in UHF RFID Reader Peak Inventory Speed >700 tags/sec
BRD-LD04 is a high-performance UHF four-port fixed RFID reading and writing device, supporting EPC global UHF Class 1 Gen 2 / ISO 18000-6C / ISO 18000-6B protocol, output power 0dBm～33dBm optional, with identification It has the characteristics of long distance, fast speed, strong multi-tag identification ability, strong anti-interference ability, high protection performance and convenient installation and use.
Key Features
1, Impinj R2000 Built-in:Impinj Indy R2000 chip as RF transceiver.
2, Anti-collision Algorithm:Unique I - Search multi-tag identification algorithm providing the highest efficiency.
3, Optimized Algorithm for Tags with Small Volume:Optimized applications for small volume with better tags respond time.
4, Dual CPU Architecture:Main CPU: tag inventory; Assistant CPU: data management.Tag inventory and data transfer are parallel and simultaneous.
5, 18000-6B/6C Full Compatible:It can be switched rapidly between 18000-6B and 18000-6C tag；Read 216 bytes in one time taking less than 500ms.
6, 18000-6B Large Data Read/Write:Write 216 bytes in one time taking less than 3.5 seconds；It can read/write data with different lengths.
7, Power Output Correction:Dual modules making sure output power can be fine adjusted；Dual modules working and keeping correction unless they are both damaged.
8, Excellent Cooling Design:Heat dissipation and large cooling surface design；Thermal coupling interfaces using high-thermal conductivity solid materials which ensure stable performance under high temperature.
Electrical Characteristics
| Dimension | 240mm(L) x 180mm(W) x 28mm(H) |
| Weight | 1.2 Kg |
| Body Material | Die-cast aluminum |
| Input Voltage | DC 12V ~ 18V |
| Standby Mode Current | <80mA |
| Sleep Mode Current | <100uA |
| Max Operating Current | 700mA +/-5% @ DC 12V Input |
| Operating Temperature | - 20 °C ~ + 85 °C |
| Storage Temperature | - 20 °C ~ + 85 °C |
| Humidity | 5%RH - 95%RH (non -condensing) |
| Interface Protocol | EPC global UHF Class 1 Gen 2 / ISO 18000-6C / ISO 18000-6B |
| Spectrum Range | 902MHz – 928MHz,865MHz – 868MHz |
| Supported Regions | US, Canada and other regions following U.S. FCC |
| Europe and other regions following ETSI EN 302 208 |
| Mainland China, Taiwan, Korea, Malaysia |
| Output Power | 0 – 33dBm |
| RF Connector | TNC/RP-TNC |
| TNC/RP-TNC | +/- 1dB |
| Output Power Flatness | +/- 0.2dB |
| Receive Sensitivity | < -85 dBm |
| Peak Inventory Speed | >700 tags/sec |
| Tag Buffer Capacity | 1000 tags @ 96 bit EPC |
| Tag RSSI | Supported |
| Antenna Detector | Supported |
| Ambient Temp Monitor | Supported |
| Working Mode | Single/DRM |
| Host Communication | RS-232 or TCP/IP |
| GPIO | 2 input optical coupling & 2 output coupling |
| Baud Rate | 115200 bps/38400bps |
| Heat Dissipation | Air cooling |
PIN Assignments
Product Dimensions(unit:MM)
Any discrepancy, please defer to the real product instead.
Product Tags:
|
|
Impinj R2000 Built in UHF RFID Fixed Reader Peak Inventory Speed >700 tags/sec Images
|
